Home>Products>SFC160S-D

SFC160S-D

    Overview Feature 產品應用 Specification Download
    Overview
    SFC160S-D fingerprint image sensor is based on capacitive-contact technology with hardened surface and enhanced ESD resistivity. There are 160x160 sensor pixels to construct sensor area of 8.0×8.0 mm2 because each pixel size is 50×50 µm2.
    The Built-in analog and digital circuitry minimizes the number of external component, and provides easy-to-use standard SPI interface to microprocessors. The operation of SFC160S-D is controlled through registers, following a simple protocol. The captured image quality can be adjusted by setting gain, offset or reference voltage parameters. The internal operation and interface speed can also be configured to the need.
    This product is a mini fingerprint algorithm module and can be used with Startek’s capacitive chip sensor reader. SFC160S-D has a wide range of applications but focuses mostly on authentication applications. 
    Feature
    • Performance: With high performance CPU, 1:1 and 1:N matching speed are both  less than 1 second.  Small Size: SFC160S-D/E  is more cost effective and is flexible to be integrated  to any device (Mobile/Tablet/Notebook)
    • Easy Integration: It is very easy to capture fingerprint image, enroll and match fingerprint through USB interface.
    • ISO Standard: ANSI/INCIT 378 Compliant Extractor & Matcher.
    • Low Power Consumption
    • Choice to set different security levels for different FRR/FAR demand
    • Small template size
    • Support verification on various platforms.
    產品應用
    SFC160S-D has a wide range of applications but focuses mostly on authentication applications.
    Specification

    Sensors

    Capacitive Chip sensor

    Scanning Speed

    30 Frame/sec

    Image Resolution       

    508 dpi

    Gray Level

    8 bits/pixel, max 256 gray scales

    Image Ratio of Length to Width

    1：1

    Interface

    USB

    Power

    DC 5V (Suspend: <0.6mA, Matching duration: 25mA)

    Dimension

    31 x 24  mm

    Operating Temperature

    0℃ ~ 70℃

    Operating Humidity

    0~95% Non-condense

    Verification speed

    1:1, 80 msec,  1:N  250 msec

    FRR (False Rejection Rate)

    1/100

    FAR (False Acceptance Rate)

    1/100,000

    ESD

    15 KV

    Share this page